Logitech G915 LIGHTSPEED User Manual

G915 LIGHTSPEED FAQs 15
Chrome OS
1. Click the status area in the lower right corner of your desktop.
2. Click Bluetooth enabled or Bluetooth disabled in the pop-up menu.
NOTE: If you had to click on Bluetooth disabled, that means the Bluetooth connection
on your Chrome device needs to first be enabled.
3. Select Manage devices... and click Add Bluetooth device.
4. Select the name of the Logitech device you want to connect to from the list of
available devices and click Connect.
5. Follow the onscreen instructions to finish pairing.
Upon pairing, the LED light on your Logitech device stops blinking and glows steady for 5
seconds. The light then turns off to save energy.
Android
1. Go to Settings and Networks and select Bluetooth.
2. Select name of the Logitech device you want to connect from the list of available
devices and click Pair.
3. Follow the onscreen instructions to finish pairing.
Upon pairing, the LED light on the Logitech device stops blinking and glows steady for 5
seconds. The light then turns off to save energy.
iOS / iPad
1. Open Settings and click Bluetooth.
2. Tap on the Logitech device you want to connect to from the Other Devices list.
3. The Logitech device will be listed under My Devices when paired successfully.
Upon pairing, the LED light on the Logitech device stops blinking and glows steady for 5
seconds. The light then turns off to save energy.

Logitech G915 LIGHTSPEED Specifications

General

Connection Type	LIGHTSPEED Wireless, Bluetooth, USB
Switch Type	GL Tactile, GL Linear, GL Clicky
Battery Life	30 hours (100% brightness)
Keycap Material	ABS
Actuation Point	1.5 mm
Actuation Force	50 g
Total Travel Distance	2.7 mm
Wireless Range	Up to 10 meters
Dedicated Media Controls	Yes
Compatibility	Windows 7 or later, macOS 10.11 or later
Backlighting	RGB (LIGHTSYNC RGB)
Dimensions	475 mm x 150 mm x 22 mm (18.7 in x 5.9 in x 0.9 in)
Weight	1025 g
Keyboard Layout	Full Size
Onboard Memory	Yes
Programmable G-keys	5