Logitech G915 LIGHTSPEED User Manual

G915 LIGHTSPEED FAQs 21
6. Choose the product you want to pair with (mouse or keyboard). Confirm that the
receiver is detected by the Device Pairing Tool as shown in the screenshot, then
continue and follow the on-screen instructions.
7. If this doesn’t work, please unplug and replug in your receiver to try the steps above
again.
If you see the message “Updating LIGHTSPEED Receiver. Please keep it plugged in” go to: My
LIGHTSPEED receiver is stuck updating its firmware.
● Using the Device Pairing Tool in G HUB
The Device Pairing Tool in Logitech G HUB allows you to pair replacement USB receivers with
your mouse or keyboard. The Device Pairing Tool also allows you to connect two LIGHTSPEED
devices to one LIGHTSPEED keyboard receiver using the Device Pairing Tool. You may also use
this tool to pair your mouse with Logitech POWERPLAY.
The Device Pairing Tool will allow you to select the receiver and the device you want to pair it
with. The receiver selected will determine what devices can be paired with it. The compatible
devices that can be paired with the selected receiver will be shown afterward.
You may need to update the firmware on your device before using the Device Pairing Tool.
Please follow any on-screen instructions you receive if G HUB informs you that your device
firmware is out-of-date.

Logitech G915 LIGHTSPEED Specifications

General

Connection Type	LIGHTSPEED Wireless, Bluetooth, USB
Switch Type	GL Tactile, GL Linear, GL Clicky
Battery Life	30 hours (100% brightness)
Keycap Material	ABS
Actuation Point	1.5 mm
Actuation Force	50 g
Total Travel Distance	2.7 mm
Wireless Range	Up to 10 meters
Dedicated Media Controls	Yes
Compatibility	Windows 7 or later, macOS 10.11 or later
Backlighting	RGB (LIGHTSYNC RGB)
Dimensions	475 mm x 150 mm x 22 mm (18.7 in x 5.9 in x 0.9 in)
Weight	1025 g
Keyboard Layout	Full Size
Onboard Memory	Yes
Programmable G-keys	5