G920 Driving Force Racing Wheel FAQs 52
● Mount and secure the G920 racing wheel using built-in bolt mounting points
○ Wheel Unit
○ Pedal Unit
○ Cable Management
NOTE: For templates for do-it-yourself surface mounting projects, see Mounting templates for
the G920 racing wheel.
Wheel Unit
G920 racing wheels are equipped with built-in bolt mounting points that can be used to
secure the wheel unit to a racing rig, such as a racing seat, cockpit, or wheel stand.
Before mounting and securing the wheel unit, make sure to connect the power adapter, pedal
unit, and Driving Force Shifter attachment (where applicable) to the connection ports on the
underside of the wheel unit. See the Cable Management section for details.
To mount the wheel unit to a racing rig using the bolt mounting points, you’ll need two (2)
M6X1 screws to securely fasten the wheel unit to the racing rig.
NOTE: Bolt mounting may also be supplemented with the built-in clamping system (where
applicable). For more information on using the clamping system, see Mount and secure the
G920 racing wheel using the clamping system.