G923 TRUEFORCE Racing Wheel for Xbox and PC FAQs 12
G HUB wheel system
Sensitivity
Alters the output response of the wheel to be more or less sensitive. Leaving this slider at 50%
will provide a linear 1:1 output. Between 51% and 100% will make the wheel increasingly more
sensitive around the center movement of the wheel.
Between 0% and 49% will make the wheel decreasingly sensitive around the center
movement of the Wheel.
Operating Range
The G923 is capable of up to 900 degrees of rotation. Reducing this setting will change the
point at which the wheel will reach full steering lock. This is especially useful if you’re driving a
car with a smaller actual steering lock angle, such as a Formula 1 or GT3 car.
Centering Spring (for games without force feedback)
Most games that support force feedback already model the correct return to center function
of the G923 based on the virtual car. It is recommended that the Centering Spring option
be turned off for these games.
Enabling the Centering Spring option will allow you to override the game features and adjust
the strength of the return to center force using the provided slider.
Torque
Only available for TRUEFORCE supported games. Torque controls the overall force feedback
strength for your G923.
Audio Effects
Only available for TRUEFORCE supported games.
Controls the overall strength of the audio-related effects (engine note, rumble strips etc.)
when using TrueForce compatible titles.
If you are using your G923 in older titles that do not support TRUEFORCE then adjustment of
the force feedback can be performed from the settings menus of the game title.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
