Need help?Do you have a question about the Logitech G930 and is the answer not in the manual?
General| Type | Circumaural |
|---|---|
| Wireless | Yes |
| Connection | USB |
| Connector | USB |
| Driver Size | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | 90dB SPL/mW |
| Microphone | Yes |
| Microphone Sensitivity | -40 dBV/Pa |
| Battery Life | 10 hours |
| Cable Length | N/A (Wireless) |
| Circumaural | Yes |
| Impedance | 32 Ohm |
| Microphone Frequency Response | 50 Hz - 20 kHz |
| Surround Sound | 7.1 Surround Sound |
| Microphone Type | Noise-canceling |
Install the software for 7.1 surround sound, G-key config, and voice morphing.
Connect adapter to charging base, base to USB port. Place base in open area.
Press power button to turn on headset. Charge before extensive use.
Program G-keys and control media playback using the G930 software.
Interpret battery status light colors for play time and charging status.
Adjust volume, microphone, EQ, and tone settings for optimal audio.
Customize G-keys for actions and check headset battery status.
To Next Page
