capitalization as shown). The web wizards look for commands with these names to automatically
assign them to the volume up and down buttons on the Harmony Remote.
To name a command for which there is no default name on the Language page, try to follow these
simple naming conventions. If you do so, it will make button assignment easier. It will also allow you
to easily share infrared commands with others.
• Do not use spaces or other special characters such as /, & or * in the name.
• Capitalize the start of words.
Examples: NextDisc, ModeDigital
• Start the command name with its main function. This helps group related commands in lists.
Example: VolumeRearUp, VolumeRearDown, VolumeFrontUp, VolumeFrontDown
• For infrared commands that select inputs (for example on a stereo receiver), start with the prefix
Input. Do not name the input based on what you have connected to your device, but name it
based on what it is called on the front of the device, or on the remote control.
Examples: InputAux, InputVideo1, InputTape, InputDVD, InputVCR.
To Previous Page
Loading...
Need help?
General
