How to fix Logitech Universal Remote software unable to communicate with Harmony 610?
If the Harmony Remote software can't communicate with the Harmony 610, try disabling any Internet security software, including firewalls and anti-virus software.
Why doesn't my Logitech Universal Remote switch to the right input?
If your TV doesn’t switch to the correct input when starting an Activity, use the Harmony Remote Software to verify that the Activity is configured to use the correct input for your TV. Also, ensure that the inputs are in the correct order so the Harmony 610 can cycle through them properly.
What to do if Logitech Harmony 610 Universal Remote doesn't turn on TV, but Help button fixes it?
If the TV doesn’t turn on when starting an Activity, but the Help button on the remote resolves the issue, you can continue using the Help button on the remote as a solution.
Why does my Logitech Harmony 610 send commands twice?
If, when pressing buttons in an Activity, the remote sends the command twice, try lowering the repeats for the device that is receiving the command. You can do this by using the troubleshoot option in the Harmony Remote Software.
What to do if Logitech Harmony 610 Universal Remote says I haven't entered the correct model number?
If you're getting a message that you haven’t entered the correct model number when adding a new TV to your account, check the front, back, or bottom of the TV for the model number. Don’t confuse it with the serial number or the model number of the device’s remote control.
How to add the On Demand command to Logitech Harmony 610 Universal Remote?
You can map the On Demand command to any unused button on the Harmony 610 or on the remote’s screen. If the command is missing, the Harmony 610 can learn it from your original remote.
Guides users on how to start an Activity by selecting it from the Activities screen.
Guides on creating a user account within the Harmony Remote Software.
Provides instructions for connecting the Harmony 610 remote to a PC using a USB cable.
Details the process of entering device information (type, manufacturer, model).
Explains how to configure Activities based on device functions and user preferences.
Describes the final step of transferring setup information from the PC to the Harmony 610.
Lists checks for verifying correct device power-on and media playback during Activity start.
Lists checks for verifying correct device power and media playback when changing Activities.
Explains how to teach the remote new commands from an original device remote.
General| LCD Size | 1.5" Diagonal |
|---|---|
| LCD Resolution | 96 x 64 |
| LCD Screen | Monochrome |
| Backlit keypad | Yes |
| Backlight Color | Green |
| Power Source | 4 x AAA batteries |
| Power Type | Alkaline |
| Brands Supported | 5, 000+ |
| Devices Supported | 225, 000+ |
| Maximum number of devices per account | 5 |
| IR Learning | Yes (Up to 250 Khz) |
| IR Transmit | 15.625 kHz to 500 kHz |
| Learning Capabilities | Any IR Device |
| IR Transmitters | 2 |
| IR Transmission Range | Up to 30ft |
| Warranty | 1 Year |
| Memory Type | Flash |
| Memory Amount | 512 KB |
| Supported Platforms | Windows 2000/XP/Vista MAC OS X 10.3 + |
Weight and Dimensions| Weight | 5.4 oz (with battery installed) |
|---|---|
| Dimensions | 1.9” x 8.0” |
To Next Page
