Logitech LIGHTSPEED G305 - LED Indicator and Software Customization; Understanding LED Indicators; G HUB Software Customization

7 ENGLISH
LED INDICATOR
Battery life
Flashing red: battery <15%
DPI
Yellow: step 1 - 400 DPI
White: step 2 - 800 DPI (default)
Orange: step 3 - 1600 DPI
Magenta: step 4 - 3200 DPI
Blue: step 5 - 6400 DPI (Step 5 can be activated viasoftwareonly)
Mode
Cyan: performance mode (default)
Green: endurance mode (can be activated viasoftwareonly).
Tips:
– Activating endurance mode will degrade tracking performance
but improve battery life.
G HUB SOFTWARE
You can customize the onboard prole settings using theGHUB.
These settings include button programming, report rate,
performance/endurance modes andtracking behavior.
G304 / G305 allows up to 5 DPI settings.
By default, G304 / G305 has the following settings:
– DPI: 400/800/1600/3200
– Report rate: 1ms
– Performance mode
©2020 Logitech. Logitech, Logitech G, Logi and their respective logos are trademarks or registered trademarks
of Logitech Europe S.A. and/or its aliates in the U.S. and other countries. All other trademarks are the property
of their respective owners. Logitechassumesno responsibility for any errors that may appear in this manual.
Information contained herein is subject tochange without notice.
8 / 25