Logitech M335 - Unifying Receiver; One Receiver for Many Devices; Connecting with Another Receiver

UNIFYING RECEIVER - ONE RECEIVER FOR
MANY DEVICES
M335 comes pre-paired with a Unifying receiver.
All you have to do to connect with the pre-paired
receiver is to plug the receiver into the USB port
on your computer.
Learn more about Unifying (/en-
us/promotions/6072)
Connecting with another Unifying
receiver?
You can also connect M335 with a Unifying
receiver other than the one included with the
mouse. To do so, follow the steps below.
1. Install Logitech Unifying software on your
computer
2. Plug the Unifying receiver in your computer
3. Open the Unifying software and follow the
on screen instructions
Download Unifying software
(http://support.logitech.com/software/unifying)
Problems connecting?
(http://support.logitech.com/article/25228?
product=a0qi00000069uiAAAQ)