1. Remove the pull tab from the keyboard and mouse. It will automatically turn on.
Channel 1 will be ready to pair.
2. Open the Bluetooth preferences on your device. (Click here for more details on how to
do this on your computer). Add a new peripheral by selecting the keyboard and
mouse from your list of devices (make sure you select the same model number that is
engraved under your keyboard) and your keyboard will be ready to use.
3. If you experience issues with Bluetooth, click here for Bluetooth troubleshooting.
Your keyboard and mouse can be paired with up to three different devices and you
can use the Easy-Switch button to toggle between them.
Pairing a second device
If you want to pair additional devices to your keyboard:
1. Select the channel you want using the Easy-Switch button — press and then hold the
same button for three seconds. This will put the keyboard in discovery mode so it can
be seen by your computer. The LED will start blinking rapidly.
2. Open the Bluetooth settings on your computer to complete the pairing. You can find
more details here.
3. Once paired, a short press on the Easy-Switch button lets you toggle between your
devices.
To Next Page
Loading...
