Logitech Pebble 2 Combo - Page 23

AMZ FAQs 23
If you want to pair additional devices to your mouse:
1. Select the channel you want using the Easy-Switch button — press and then hold the
same button for three seconds. This will put the mouse in discovery mode so it can be
seen by your computer. The LED will start blinking rapidly.
2. Open the Bluetooth settings on your computer to complete the pairing. You can find
more details here.
3. Once paired, a short press on the Easy-Switch button lets you toggle between your
devices.
Pairing a device again
If a device becomes disconnected from the keyboard, you can easily re-pair the device with
the keyboard. Here's how:
On the keyboard
● Press and then hold down the Easy-Switch button until the status light starts blinking
rapidly.
● The keyboard is now in pairing mode for the next 3 minutes.
On the device
● Go to Bluetooth settings on your device and select Pebble K380s/Pebble K3 when it
appears in the list of available Bluetooth devices.
● Follow the onscreen instructions to complete the pairing.
● Upon pairing, the status LED on the keyboard stops blinking and remains steady for 10
seconds.