Need help?Do you have a question about the Logitech POWERPLAY and is the answer not in the manual?
General| Device Type | Wireless Charging System |
|---|---|
| Wireless Charging Standard | Proprietary |
| Included Mouse Pad | Yes |
| Connection Type | USB |
| Compatibility | G903, G703, G502 LIGHTSPEED, G PRO Wireless |
| Surface Options | Hard and Cloth surfaces |
| Dimensions | 321 mm x 344 mm |
| Cable Length | 1.8 m |
| Charging Technology | Wireless charging |
Turn off the mouse before proceeding with the setup.
Connect the charging base to a power source using the USB cable.
Swap the mouse's weight module with the POWERCORE charging module.
Power on the mouse after the POWERCORE module is installed.
Troubleshooting steps for when the control box's G logo does not light up.
Address issues with the control box's blue flashing G logo indicating pairing problems.
Solutions for the mouse not charging or powering on, with no LED on the control box.
Explanation for why the mouse battery stops charging at 85-95%.
Interpret the different states of the POWERPLAY control box's white LED.
Clarification on using only the included USB cable for the POWERPLAY system.
Warning against modifying the POWERPLAY charging base to avoid voiding warranty.
To Next Page