Logitech PRO X 2 LIGHTSPEED - General Headset Operation; Power Switch and LED Indicators; Volume, Mute, and Microphone; Connectivity and Charging Modes

3 ENGLISH
GENERAL HEADSET OPERATION
1 Power switch
– When power on LED will light solid green for 5 seconds
if battery power >= 10%. Light will be red for 5 seconds
if battery power is <=10%. Headset will power down
automatically aer 30 minutes of no audio to save
battery life. To resume use, turn the power o, then back
on again. Timeout value can be adjusted in G HUB
2 Volume wheel
– Rotate up to increase OS volume
– Rotate down to decrease OS volume
3 Microphone mute toggle
– Microphone is active when red is not visible.
Microphoneis muted when red is visible
4 USB C charging port
– Use provided USB A to USB C charging cable to charge
headset by plugging into USB port on PC
– Cable is for charging and rmware update only –
audiowill not play over USB
5 Microphone
– For optimal voice pickup, place foam ball approximately
two ngers’ width from the corner of your mouth
– Blue VO!CE functionality can be enabled using G HUB
soware
6 Bluetooth / LIGHTSPEED Toggle
– Press to toggle between BT and LIGHTSPEED modes.
LEDindicator will turn xed blue for 5 seconds when put
intoBluetooth mode, or cyan for 5 seconds when put
into LIGHTSPEED mode.
1
2
3
4
5
6