Logitech PRO X 2 LIGHTSPEED User Manual

PRO X 2 LIGHTSPEED
SETUP GUIDE
|
GUIDE D’INSTALLATION

Logitech PRO X 2 LIGHTSPEED Specifications

General

Driver Size	50 mm
Frequency Response	20 Hz - 20 kHz
Battery Life	Up to 50 hours
Connectivity	LIGHTSPEED wireless, Bluetooth, 3.5mm
Headphone Type	Over-ear
Driver Material	Graphene
Surround Sound	DTS Headphone:X 2.0
Compatibility	PC, PlayStation, Nintendo Switch, Mobile
Wireless Range	Up to 30m
Microphone Type	Cardioid
Weight	345 g

Summary

General Headset Operation

Power Switch and LED Indicators

Details power switch function, LED status for battery levels, and auto-off.

Volume, Mute, and Microphone

Explains volume wheel, mic mute toggle, and microphone placement.

Connectivity and Charging Modes

Covers USB C charging and switching between Bluetooth/LIGHTSPEED.

PC Setup Instructions

Connecting Microphone and Adapter

Steps to connect the microphone boom and LIGHTSPEED wireless adapter to your PC.

Headset Power-On and Battery Status

Powering On and LED Feedback

Details powering on the headset and visual battery status indicators.

Software and OS Configuration

Configuring Windows Sound Settings

Guide to setting headset as default output and input in Windows.

Installing Logitech G HUB Software

Instructions for downloading software for advanced headset features.

Pairing with LIGHTSPEED Adapter

Connecting the LIGHTSPEED Adapter

Step 1: Plug in the LIGHTSPEED wireless adapter.

Accessing Headset Pairing Button

Step 2: Remove the left earpad cushion to access the pairing button.

Initiating LIGHTSPEED Pairing

Pairing the Headset Button

Step 3: Long press headset pairing button with a paperclip.

Pairing the Adapter Button

Step 4: Press the LIGHTSPEED wireless adapter pairing button.

Bluetooth Pairing Procedure

Powering On for Bluetooth

Step 1: Turn on the headset using the power switch.

Activating Bluetooth Mode

Step 2: Press the BT/LIGHTSPEED toggle button; power light turns blue.

Completing Bluetooth Connection

Entering Bluetooth Pairing Mode

Step 3: Press and hold BT/LIGHTSPEED button; headset LED blinks blue.

Confirming Bluetooth Pair Success

Step 4: Follow device steps; LED turns solid blue upon completion.

Switching Connectivity Modes

Mode Switching Indicators

Short press toggle button; LED shows blue for Bluetooth, cyan for LIGHTSPEED.

Using Headset in Wired Mode

Powering Off for Wired Use

Step 1: Power off the headset to enable wired mode operation.

Connecting the 3.5mm Audio Cable

Step 2: Plug the 3.5mm cable into the headset's audio jack.

Connecting Wired Audio Sources

Connecting to Audio Source Device

Step 3: Plug the other end into the desired audio source device.

Muxing Aux Source into Wireless

Ensuring LIGHTSPEED Mode for Mux

Step 1: Headset must be in LIGHTSPEED mode for MUXing.

Connecting Cable to LIGHTSPEED Adapter

Step 2: Plug the 3.5mm cable into the LIGHTSPEED wireless adapter.

Completing Aux Source Muxing

Connecting Cable to Audio Source

Step 3: Plug the other end into the desired audio source device.

Understanding Muxed Volume Control

MUXed source volume is constant; wireless signal volume is adjustable.