● Turning the MK270 mouse on and off
To turn the MK270 mouse on and off:
1. Flip the mouse over.
2. Locate the power switch on the bottom.
NOTE: The M185 mouse is included in the Wireless Combo
MK270.
3. Slide the switch to the right to turn it ON.
4. Slide the switch to the left to turn it OFF.
● Cursor does not follow mouse movements
If the cursor isn't following the movements of your mouse, we suggest you:
● Use a mouse pad.
Avoid using your mouse on:
● Glass and other see-through surfaces
● Reflective surfaces, such as mirrors and metal desks
● Wood grains and grooved surfaces
● Try the mouse on a piece of white paper to make sure it isn't a tracking issue on the
particular surface you're using.
To Next Page
Loading...
