Logitech Z323 - Page 5

English 5
CONNECT TO AUDIO SOURCE
1. For 3.5 mm connection:
Connect the 3.5 mm plug from the right speaker to the audio jack on your device (computer, tablet, smartphone, etc.)
Youcan also connect a device to the auxiliary input on the side of the right speaker.
2. For RCA connection:
Connect one end of the RCA cable to the corresponding RCA jack on the back of the subwoofer and the other end
totheRCA jack on your device (TV, gaming console, etc.).
Note: The RCA cable is not included in the box and must be purchased separately.
3. Plug your headphones into the headphone jack on the side of the right speaker. To adjust the volume of yourheadphones,
use the volume control knob on the front of the right speaker.
1
2
3
3.5mm