Logitech Z323 Complete Setup Guide

English 4
CONNECT THE SPEAKERS
1. Plug the d-sub connector on the right satellite into the d-sub subwoofer port. Then plug the RCA connector
on the left speaker into the corresponding jack on the back of the subwoofer.
2. Plug the power plug into an electrical outlet.
3. Turn the speaker on using the power knob.
2
1
3
ON

Logitech Z323 Specifications

General

Product color	Black
RMS rated power	30 W
Recommended usage	PC
Audio output channels	2.1 channels
I/O ports	1 x RCA, 2 x 3.5 mm jack
Frequency range	55 - 20000 Hz
Speaker interface type	3.5 mm
Mac compatibility	Yes
Connectivity technology	Wired
Amplification device included	-
Satellite speaker type	2-way
Number of satellite speakers	2
Satellite speakers RMS power	6 W
Satellite speaker dimensions (WxDxH)	87 x 135 x 203 mm
Subwoofer dimensions (WxDxH)	150 x 182 x 221 mm
Power source	AC
Package depth	255 mm
Package width	240 mm
Package height	230 mm
Package weight	3584 g
Master (outer) case width	260 mm
Master (outer) case height	243 mm
Master (outer) case length	273 mm
Master (outer) case weight	4032 g