Logitech Zone Vibe 125 User Manual

CONNECT YOUR HEADPHONES
a. Connect via USB-A receiver
1. Insert the receiver into the computer USB-A port.
Or insert the USB-A receiver with the USB-C
adapter to the USB-C port.
2. Zone Vibe 125 is already paired to the receiver
itships with.
3. Once successfully paired, the LED light on
thereceiver will turn solid white.
b. Connect via BLUETOOTH
®
1. Slide the switch to the bottom in the arrow’s
direction for 2 seconds to initiate pairing.
2. The LED light will ash white rapidly.
3. Open Bluetooth
®
settings on your device.
4. Select Logi Zone Vibe 125 in discoverable devices.
5. Once successfully paired, the LED light will turn
solid white.
LOGI Zone
Vibe 125
2 sec.
USB-A
USB-C
ADJUSTING HEADPHONES
1. Adjust the headphones by sliding earcups up
anddown the extended part of the headband.
2. It may be easier to adjust the headphones on
your head. Slide the earcups up and down the
headband until they sit comfortably on your ears.
6 English

Logitech Zone Vibe 125 Specifications

General

Type	On-ear
Connectivity	Wireless
Wireless Technology	Bluetooth
Bluetooth Version	5.2
Microphone	Yes
Driver Size	40 mm
Frequency Response (Music mode)	20 Hz - 20 kHz
Frequency Response (Talk mode)	100 Hz - 8 kHz
Charging Port	USB-C
Charging Time	2 hours
Noise Cancelling	No
Foldable	No
Battery Life	20 hours
Weight	185 grams
Quick Charge	Yes
Color	Graphite
Wireless Range	Up to 30 meters (100 feet)