Logitech Zone Vibe 125 User Manual

CHARGING
To conserve battery life, headphones automatically
power o after 30 minutes without usage.
Sleep timer could be adjusted in Logi Tune.
The LED light on the headphones will blink slowly
inRED when the battery is low.
Charging via USB cable
1. Plug the USB-C cable end into the USB-C port on
thebottom of the earcup.
2. Plug the USB-A end into the USB-A charging port on
your computer or AC adapter.
3. The LED light will start breathing white when charging.
4. The LED light will turn solid white when fully charged.
– 2 hours will fully charge the battery.
– 5 minutes will give you 1 hour of playback.
Battery life may vary based on user, environment,
andcomputing conditions.
5. The headphones can be used with the receiver
andBluetooth
®
paired while charging.
LOGI TUNE
Logi Tune helps boost your headphones performance
withperiodic software and rmware updates.
It is recommended to update both your headphones
and receiver. To do so, download Logi Tune from
www.logitech.com/tune
9 English

Logitech Zone Vibe 125 Specifications

General

Type	On-ear
Connectivity	Wireless
Wireless Technology	Bluetooth
Bluetooth Version	5.2
Microphone	Yes
Driver Size	40 mm
Frequency Response (Music mode)	20 Hz - 20 kHz
Frequency Response (Talk mode)	100 Hz - 8 kHz
Charging Port	USB-C
Charging Time	2 hours
Noise Cancelling	No
Foldable	No
Battery Life	20 hours
Weight	185 grams
Quick Charge	Yes
Color	Graphite
Wireless Range	Up to 30 meters (100 feet)