Logitech ZONE VIBE WIRELESS User Manual

CHARGING
To conserve battery life, headphones
automatically power o after 30 minutes
without usage.
Sleep timer can be adjusted in Logi Tune.
The LED light on the headphones will blink
slowly in RED when the battery is lower
than 10%.
Charging via USB cable
1. Plug one end of the cable to the USB-C port on
the bottom of the earcup and the other end
into the USB-C charging port on your computer.
2. The LED light will start breathing white when
charging.
3. The LED light will turn solid white when fully
charged.
– 2 hours will fully charge the battery.
– 5 minutes will give you 1 hour of playback.
Note:
Battery life was measured from fully charged to automatic
shut-o, utilizing 50% volume for both talk time and
listening time.
4. The headphones can be used with the receiver
and Bluetooth paired while charging.
LOGI TUNE
Logi Tune helps boost your headphones
performance withperiodic software and
rmware updates.
It is recommended to update both your
headphones and receiver. To do so, download
Logi Tune from www.logitech.com/tune
www.logitech.com/tune
Logi Tune
11 English

Logitech ZONE VIBE WIRELESS Specifications

General

Battery Life	Up to 18 hours (talk time), up to 20 hours (listening time)
Charging	USB-C
Driver Size	40 mm
Frequency Response (Music Mode)	20 Hz - 20 kHz
Charging Time	2 hours
Foldable	Yes
Water Resistance	No
Connectivity	Bluetooth
Microphone	Yes
Compatibility	Windows, macOS, ChromeOS
Wireless Range	Up to 30 meters (100 feet)
Impedance	32 Ohm
Frequency Response (Talk Mode)	100Hz - 8kHz
Bluetooth Version	5.2
Color Options	Graphite, Off-White, Rose
Weight	185 grams