Connecting to your headset
Keep your receiver plugged in during the
connection process and make sure your
headset for is in pairing mode.
Cancel pairing
Zone Wireless connected
Your headset is ready to use.
Done
New receiver found
Press and hold the paring button on your
headset for 3 sec to enter pairing mode.
Show me how
Continue
Energia
4. Entre no modo de pareamento no headset
pressionando o botão liga/desliga por
3segundos. Clique em Continuar.
5. Se o modo de pareamento for bem sucedido,
os indicadores luminosos no receptor e no
headset piscarão em branco.
6. Depois de ver esta tela, o receptor estará
pareado com o headset. Os indicadores
luminosos no receptor e no headset carão
brancos sólidos.
17 Português
To Next Page
Loading...
