Logitech ZONE WIRELESS - Logi Tune App Setup

USB-A USB-C ADAPTER USB-A | USB-C
WHAT’S IN THE BOX
1. Headset
2. USB-A receiver
3. USB-C to A adapter
4. USB-A to C charging cable
5. Travel bag
6. User documentation
POWER ON/OFF
1. Press power button for 1 second.
2. Once powered on, light indicator turns white.
Ifnodevice is connected, it will ash white slowly.
PAIRING VIA BLUETOOTH
®
1. Press power button for 2 seconds. Light indicator will
ash white rapidly.
2. Open Bluetooth
®
settings on your device.
3. Select Zone Wireless in discoverable devices.
4. Once successfully paired, light indicator will turn
solidwhite.
PAIRING VIA USB RECEIVER
1. USB-A
Insert the receiver into the computer USB-A port.
USB-C
Insert the USB-A receiver into the USB-C adapter.
Then insert the adapter into the computer USB-C port.
2. Headset is already paired to the receiver it ships with.
Just power on the headset. Once successfully paired,
the light indicator on the receiver will remain solid
white. Light indicator on the headset will turn solid
white.
Power
USB-C
USB-A
Zone
Wireless
2 sec.
4 English