Package Contents
• HN-DR4PN2U
• Power Adapter
• 1 x RJ-11 Telephone Cable
• 1 x RJ-45 LAN Cable
• 1 x USB Cable
• Quick Installation Guide
Minimum System Requirements
•
ADSL Subscription
• 3G/4G USB MODEM with active subscription
• 3G/4G USB MODEM is compatible with HN-DR4PN2U
• PC with Ethernet Port and/or Wireless
•
Wireless Adapter for non Wireless-enabled PCs
Hardware Installation
1. If you have ADSL Subscription only and no 3G/4G USB MODEM
• Connect one end of the telephone cable to the Line port on the LogN HN-
DR4PN2U.
• Connect the other end of the telephone cable into the ADSL port of the ADSL
splitter or directly to the wall phone socket.
• Connect the ADSL splitter line port to the wall phone socket whereby the ADSL
service is activated.
2. If you have 3G/4G USB MODEM only and no ADSL Subscription
• Plug your 3G/4G USB MODEM into the USB port
To Next Page
