Fiskaregatan 2, 871 33 Härnösand, SWEDEN
+46 611 182 85 | info@logosol.com | www.logosol.com
The height of the log supports is adjusted in
xed steps and then locked in place with the
bent hitch pin and the spring cotter pin.
Adjust the angle of the log supports by
loosening the bolts of the angle adjustment
plate. Then adjust the angle of the log support
until it is at a 90 degree angle to the cross
bunk.
90
THE ANGLE OF THE LOG SUPPORTS
THE HEIGHT OF THE LOG SUPPORTS
FUNCTIONS
To Previous Page
Loading...
