LogRite Log Stand User Manual

LogRite’s log stand attachment can be placed on either our cant hooks or peaveys.
This attachment allows you to roll a log onto the tool itself. The tool and log stand
then hold the log up off the ground so that a cut can be made safely through the
log without cutting into the ground. The log stand works equally well with both the
peavey and cant hook and then can be removed so that it is not in the way when
using your cant hook or peavey for moving logs.
Log Stand
Manual
101 Industrial Park Road
Vernon, CT 06066
www.logrite.com
800-631-4791

LogRite Log Stand Specifications

General

Brand	LogRite
Model	Log Stand
Category	Racks & Stands
Language	English

Summary

Log Stand Installation

Attaching the Log Stand

Instructions on securing the log stand attachment to a peavey or cant hook using screws.

Log Stand Usage

Setting the Hook

Guide on placing the swinging hook over the log and pulling the handle to set it.

Turning the Log

Description of using the tool to lift the log and set the stand on the ground.

Log Stand Support

Instruction on continuing to pull the handle until it rests on the ground to support the log.