NO. NO.
1 6
Description Description
Fast charge indicator
Short press button or LED light power button to wake up the
product.
a. Method one: Normal jumpstart
Connect the positive and negative of the product clamps to the positive and
negative of the car battery respectively, and make sure the connection is
good;
Wake up the product, short press the "LED light" button or short press the
"Switch" button, if the connection is good, the green light on the display panel
will be on and flashing, and the positive and negative voltages of the startup
power supply in parallel with the car will be displayed at the same time. The
car can be started at this time;
If the car starts successfully, short press the switch button to exit the jump
starter function, and pull out the jump starter clamp.
Digital display area
Voltage indicator
Time unit indicator
Pressure unit indicator
Battery indicator
2 7
Charging indicator
3 8
USB-A/USB-C output indicator
4 9DC output indicator
5 10External input indicator
4. Operation Process
4.1 Display Interface Description
4.2 How to Wake up the Product
4.3 How to Use the Car Jumpstart Function
1
2
7
8
9
10
3
4
5
6
water inlet/
outlet pipe
USB-A to
USB-C cable
Nipple
connector
/Wrench
USB-C cable
User manual
website: www.jomgand.com
07LOKITHOR
1
2
3
To Next Page
Loading...
