11
SCANNING PROCESS FOR 35 MM OR 120 NEGATIVES
USING A DIGITAL CAMERA AND THE DIGITALIZA+ OR
DIGITALIZA MAX
1. If you are using the DigitaLIZA Max, remove the Backlight Panel with Built-in
120 Film Holder [B] from the Smartphone Stand [C] and put it on a flat
surface.
2. If you are scanning 120 film, follow the steps in the previous section to load
your film into the Backlight Panel with Built-in 120 Film Holder [B].
3. If you are scanning 35 mm film, follow the steps in the previous section to
load your film into the 35 mm Film Holder [A]. Put the 35 mm Film Holder
[A] with film loaded on top of the Backlight Panel with Built-in 120 Film
Holder [B].
4. Place the Removable Spirit Level [A4] on the 120 Film Holder Cover [B1]
or into the Spirit Level Slot of the 35 mm Film Holder [A].
5. Look at the Removable Spirit Level [A4] to make sure that the scanning
unit has been placed on a flat surface.
6. Set your digital camera above the scanning unit using a tripod mounted at a
suitable distance to prepare for scanning.
7. Press the Backlight On/Off Switch [B2] on the Backlight Panel [B3] to
turn the Backlight Panel [B3] on.
To Next Page
Loading...