10
LOADING FILM INTO THE 120 FILM HOLDER [B]
1. Open the 120 Film Holder Cover [B1] on the Backlight Panel with Built-in
120 Film Holder [B].
2. Remove the 35 mm Panoramic Diffuser [B9] located on top of the Back-
light Panel [B3].
3. Insert the 120 film into the Backlight Panel with Built-in 120 Film Holder [B]
with the emulsion side facing down and close the 120 Film Holder Cover [B1]
to hold the film in place.
4. To adjust the position of the film frame, repeat steps 1-3.
To Next Page
Loading...