15
The DigitaLIZA+ and DigitaLIZA Max both allow you to scan 127 films using the
120 Film Holder built into the Backlight Panel:
LOADING 127 FILM INTO THE 120 FILM HOLDER [B]
1. Open the 120 Film Holder Cover [B1] of the 120 Film Holder [B].
2. Install the 127 Film Mask [B7] on top of the Light Panel [B3].
3. Put the 127 film into the 120 Film Holder [B] with 127 Film Mask [B7]
attached and close the 120 Film Holder Cover [B1] to secure the film.
4. To adjust the position of the film frame, repeat steps 1-3.
5. Follow the steps in the previous section for scanning using your digital camera
or smartphone.
To Next Page
Loading...