14
SCANNING PROCESS FOR 35 MM OR 120 NEGATIVES
USING A SMARTPHONE AND THE DIGITALIZA MAX
8. Position the Removable Spirit Level [A4] on top of the 120 Film Holder
[B1] or into the Spirit Level Slot of the 35 mm Film Holder [A].
9. Look at the Removable Spirit Level [A4] to make sure that the scanning
unit has been placed on a flat surface.
10. Press the Backlight On/Off Switch [B2] on the Backlight Panel [B] to turn
the backlight on.
11. Open the camera application on your smartphone and look at the screen of
your smartphone whilst sliding the Base Plate Slider [C2] up & down, left &
right to center the film frame on your smartphone's camera screen.
12. Loosen the Smartphone Clamp Screw [C7] at the back of the Smartphone
Clamp [C6], then move the Smartphone Clamp [C6] with your smart-
phone attached up & down carefully to get the biggest scan of the image
within your smartphone camera's focus range.
13. If you are scanning a negative image you can invert your image using imaging
apps or imaging software on your computer (please refer to the suggestions
at lomography.com)
To Next Page
Loading...