Lomography LomoGraflok 4x5 Instant Back - Page 11

11
PRECAUTIONS
1. Do not press the darkslide area after the Dark Slide [4] is
installed in the LomoGraok.
2. Except when shooting a photo, always keep the Dark Slide [4]
installed in the LomoGraok.
3. Make sure the Film Ejection Slot [7] is not blocked while
ejecting your lm.
4. Always keep the LomoGraok off while traveling to prevent lm
ejecting accidentally.
5. Keep the Dark Slide [4] straight.
FAQS
Q: What ISO should be set when shooting with the LomoGraok?
A: ISO 800 for Fujilm Instax Film.
Q: Which cameras are compatible with the LomoGraok?
A: The LomoGraok is designed for all 4×5 cameras with a Graok
mechanism. It will also t inside standard 4×5 sheet lm holders
with spring backs that open 50 mm or more.