Lomography LomoGraflok 4x5 Instant Back - Page 7

7
instRUCtions foR Use
BATTERY INSTALLATION
The LomoGraok operates with 4 × AA batteries (4 × 1.5 V).
1. Open the Battery Door [6] by sliding the Battery Door [6] outward.
2. Insert 4 × AA fresh batteries according to the indication inside
the Battery Door [6].
3. Slide back and close the Battery Door [6] in place.
FILM INSTALLATION
Use only Fujilm Instax Wide lm with LomoGraok.
1. Open the Back Door [9] by lifting the Back Door Lock [11].
2. Match the yellow mark on the Fujilm Instax Wide lm with the
Yellow Mark [10] inside the Film Chamber and install the lm
pack.
3. Close the Back Door [9].
4. Switch on the LomoGraok by switching the On/Off Switch [1].
5. Press the Film Ejection Button [2] to eject the black card of the
lm pack.