What causes a LONCIN 850 Mini Tiller's rotary tilling blade to break?
The rotary tilling blade on your LONCIN Tiller may break if it hits stones, bricks, or other hard objects during operation. Replace the broken blade and be careful to avoid such collisions in the soil.
How to fix a LONCIN Tiller with oil leak from the back cover of the main shaft?
If your LONCIN Tiller has an oil leak from the back cover of the main shaft, it could be due to a failed O-ring (replace the ?13×1.9 O ring) or a failed oil seal (replace the 20×35×7 oil seal) on the main shaft, or a failed O-ring on the oil seal seat (replace the ? 38×1.8 O ring).
What causes oil leak from the oil drain hole in LONCIN 850 Mini?
If there's an oil leak from the oil drain hole of your LONCIN Tiller, the seal gasket might be damaged (replace the ?10×2.65 O ring) or the threaded plug might be loose (retighten the threaded plug).
What causes uncompleted gear engagement in a LONCIN Tiller?
Uncompleted gear engagement in your LONCIN Tiller can be caused by several factors: excessive wear of the block (replace the block), a loose driving bevel gear (tighten the round nut), excessive wear of the upper hole of the shift block (replace the shift cam and shift block), a failed positioning spring inside the main shaft (replace the spring), the main shaft bouncing due to a loose gland bolt (retighten the gland bolt), or interference during gear shifting caused by a deformed shift lever (straighten or replace the shift lever).
Why does my LONCIN Tiller skid when I grip the clutch handle?
If your LONCIN Tiller is skidding, and the transmission main shaft rotates slowly or not at all when you grip the clutch handle, it could be due to a fatigued spring (replace the spring), abnormal rotation or failure of the fork shaft causing incomplete return of the fork (clean the junction surface between the locating shaft and pusher), or an inappropriately adjusted clutch cable (readjust the clutch cable).
What causes oil leaks from connections of the transmission box on a LONCIN Tiller and how to fix it?
Oil leaks from the connections of the transmission box on your LONCIN Tiller can occur if the connecting bolt is loose (retighten the bolt) or if the seal gasket is damaged (replace the seal gasket).
Why is the clutch on my LONCIN 850 Mini Tiller unable to engage and disengage?
The clutch on your LONCIN Tiller might not be engaging or disengaging due to several reasons. It could be a faulty clutch handle (replace or repair it), a damaged clutch cable (replace the cable), or an inadequately adjusted clutch fork (readjust the clutch cable or replace the clutch fork). Other potential causes include a fork shaft that has fallen off, a broken or bent fork pin (replace the fork pin), a failing friction disk or spring (replace the respective part), the friction disk set not contacting the bearing face (insert washers behind the bearing), or a burnt-out bearing inside the clutch (replace the bearing and add oil to the transmission box if necessary).
Adjusts reverse running mechanism for proper gear shifting.
Adjusts clutch cable due to wear for optimal performance.
Adjusts throttle cable for engine acceleration and deceleration.
Adjusts handlebar height based on user's height and farming needs.
Diagnoses and resolves clutch engagement and disengagement issues.
Solves problems related to gear engagement, reversing, and movement.
Addresses issues like high noise, seizure, and overheating in the running mechanism.
Fixes problems with tilling blades and operating cables.
Proper training and understanding of the machine's operation and safety.
Checks and preparations before operating the mini tiller.
Guidelines and precautions during the operation of the mini tiller.
Procedures for machine repair, maintenance, and proper storage.
Lists key technical specifications of the mini tiller.
Identifies and names the main parts of the mini tiller.
Step-by-step instructions for assembling the mini tiller after unpacking.
Procedures for installing and adjusting control cables.
Procedures for checking and filling engine and transmission oil.
Steps for starting the mini tiller engine.
Instructions for operating the mini tiller in different modes.
How to connect and operate attached components like rotary tilling blades.
Safety guidelines and precautions during mini tiller operation.
Initial running-in procedure for the mini tiller engine and machine.
Routine maintenance tasks and schedules for the mini tiller.
A schedule detailing maintenance tasks based on work time.
Measures to take for long-term storage to prevent rust and erosion.
Adjusts reverse running mechanism for proper gear shifting.
Adjusts clutch cable due to wear for optimal performance.
Adjusts throttle cable for engine acceleration and deceleration.
Adjusts handlebar height based on user's height and farming needs.
Diagnoses and resolves clutch engagement and disengagement issues.
Solves problems related to gear engagement, reversing, and movement.
Addresses issues like high noise, seizure, and overheating in the running mechanism.
To Next Page
General