Part II Repair Instructions
- 7 -
Follow up the guidance indicated by the signs below:
Coat oil at the
indicated
position.
Operate with
special tools.
Coat grease at the
indicated
position.
○×○(○): the mode, length and quantity of flange bolt.
P.: the page shall be referred to.
2-2 Marking position of machine No.
Machine No. is marked on the crankcase as shown in the figure below. When LONCIN dealers
require correct parts during maintenance, the machine number is used to check the engine or to order
parts.
Engine No.:
TXXXXX XX XX XXXXXXX
Serial no.
Production month
Production year
Development order no.
Markin
position
of machine No.
To Next Page
Loading...
