Need help?Do you have a question about the LONCIN LC168F-2H and is the answer not in the manual?
General| Displacement | 196 cc |
|---|---|
| Bore x Stroke | 68 x 54 mm |
| Compression Ratio | 8.5:1 |
| Fuel Type | Gasoline |
| Starting System | Recoil start |
| Weight | 16 kg |
| Shaft Type | Horizontal |
| Lubrication System | Splash |
| Fuel System | Carburetor |
| Engine Type | Single cylinder, 4-stroke, air-cooled |
| Fuel Tank Capacity | 3.6 L |
| Oil Capacity | 0.6 L |
General safety guidelines, user responsibilities, and hazard awareness for engine operation.
Precautions for safe refueling and awareness of hot exhaust system risks.
Warnings about carbon monoxide and advice regarding other equipment safety.
Diagram illustrating the placement of primary engine components and operational controls.
Operation of the fuel valve for controlling fuel flow and the engine switch for ignition.
Adjustment of throttle for speed control and choke for starting cold/warm engines.
Instructions for using the recoil starter grip to crank the engine.
Checking for leaks, dirt, damage, and ensuring all parts are secured.
Procedures for verifying engine oil, air filter, and fuel levels.
Reviewing safety precautions for the equipment being powered.
Review of essential safety information and precautions before initial engine use.
Step-by-step guide for initiating engine startup, including fuel and choke settings.
Instructions for safely shutting down the engine under normal and emergency conditions.
How to adjust the throttle lever for the desired engine operating speed.
Explains the value of maintenance and critical safety measures during service.
Provides a timeline for routine maintenance tasks based on usage intervals.
Covers fuel recommendations, oil changes, and service for air filters and spark plugs.
Includes cleaning the sediment cup and adjusting idle speed.
Steps for preparing the engine for storage, including cleaning and fuel management.
Guidance on using fuel stabilizers and draining fuel for long-term storage.
Guidelines for safely transporting the engine, including securing and tilting.
Common causes and corrections for an engine that fails to start.
Possible reasons and solutions for reduced engine power.
Locating the serial number and information on remote control linkage installation.
Guidance on high altitude operation, carburetor modifications, and oxygenated fuels.
Details on emission systems, tampering, problems, and recommended replacement parts.
Quick reference for maintenance, tune-up specs, and available publications.
To Next Page
