- ~
~
~--
~~
-------
---------
TECHNICAL & CONSUMER INFORMATION
A manufacturer of an aftermarket part assumes the responsibility that the part will not
adversely affect emission performance. The manufacturer or rebuilder of the part must
certify that use of the part will not result
in
a
failure of the engine to comply with emission
regulations.
Maintenance
Follow the maintenance schedule. Remember that this schedule
is
based on the
assumption that your machine will be used for its designed purpose. Sustained high-Ioad
or high-temperature operation, or use
in
unusually wet or dusty conditions, wil! require
more frequent service.
Engine Tune-up
ITEM SPECIFICATION
Spark plug gap
0.028
in
-0.031
in
(0.70 mm -0.80 mm)
Valve clearance
IN: 0.15
mm+0.02
mm (cold)
EX: 0.20
mm+0.02
mm (cold)
Other specifications
No other adjustments needed
CONSUMER INFORMATION
Publications
These publications will give you additional information for maintaining and repairing your
engine. You mayorder them from your engine dealer.
Parts Catalog
This manual provides complete, illustrated parts lists.
QUICK REFERENCE INFORMATION
Type
SAE 10W-30,API SE or SF, for general use
Engine Oil
Capacity 160/200F(D):0.6
L
Spark Plug
Type F7RTC or other equivalents.
Gap
0.028-0.031
in
(0.70
mm-0.80
mm)
Carburetor
Idle speed 1800 rpm
+
150 rpm
Each use Check engine oil. Check air filter.
Maintenance
First 20 hours
Change engine oll,
Subsequent Refer to the maintenance
-26-
To Next Page
Loading...
Need help?
General
