LONCIN LC2P73F - Speed-Regulating Arm and Breather Slot

Chapter V Disassembly & Repair
- 43 -
5-2-7 Speed-regulating arm, breather slot
Disassembly/assembly
Oil seal 35 × 52 × 7 mm
Assembly: don’t curl the
edge of oil seal when
passing through the
crankshaft.
Air guide sleeve
Oil seal
Breather-slot cover plate
Breather-slot
sealing gasket
Assembly: edge of the
filter screen is not
exposed and the dirty
ones are required to be
cleaned timely.
Filter screen
Valve, ch amber
Assembly: adjust or
replace deformed or
non-completely-sealed
valves.
Speed-regulating arm
Assembly:
Confirm if the
action is smooth
after installation.
Pin lock
Assembly:
Immediately fit the
split pin after
assembling
Tube, breather
Assembly
Deformation and
rupture should be
re
p
laced in time