LONCIN LC2P73F - Crankcase, Crankshaft, and Piston Assembly

Chapter V Disassembly & Repair
- 45 -
Engine-oil filter screen
Dirty or damaged one
shall be cleaned or
replaced immediately.
Confirm if there is
engine oil leakage
after installation.
Valve-drain, oil
Assembly:
Thoroughly wash it
before installation.
Oil pump
Governor gear
Oil seal
Assembly: don’t curl the
edge of oil seal when
passing through the
crankshaft.
Connctor,oil
Seal ring
Assembly
Deformation and
rupture should be
re
p
laced in time
Torque: (9~ 13) N.m
Confirm if there is engine oil
leakage after installation.
Regularly replace every 100 h.
Secondary oil filters
Fine-filter
mounting bolt
Tor
q
ue:
(
40
~
45
)
N•
m
Cap assy