Part I Technical Specifications
- 2 -
1-2 Technical parameters
The rated power of the engine indicated in the Manual is the net output power (net power) at 3,600 rpm of an
engine under the production status measured in accordance with SAE J1349. For mass production engines, the
value may vary.
The actual power of engine installed on the terminal may vary in output, which depends on several factors
including the rotating speed of engine during practical use, environmental conditions, maintenance and other
variants.
Model 2P73F 2P76F
Type OHV、V-twin Cylinders、Forced air cooling 、4-Stroke
Max. power(kW/3600rpm) 14.17 /3600 14.92/3600
Net. Power (kW/rpm) 12.5/3600 13.5/3600
Max . torque (N·m/rpm/min) 37.0/(2400~2600) 40.0/(2400~2600)
Idle speed 1850±150 rpm
Bore X Stroke(mm) 73×70 76×70
Displacement(cc) 586 635
Compression Ratio 8.7 :1
Lubricating mode splash+pressure lubrication
Starting mode Electric start
Rotation Anti-clockwise(from P.T.O. side)
Valve clearance input valve： 0.10~0.15mm, output valve：0.10~0.15mm
Spark plug clearance 0.7~0.8mm
Igniting mode Transistorized magneto Ignition
Air cleaner Foam & paper
Fuel type Unleaded gasoline, minimum 90 RON
Oil capacity ( L) 1.7
Dimension(L×W×H)(mm) 430×420×332
Net weight (kg) 36 36
To Next Page
Loading...
Need help?
General
