Use of Engine
- 6 -
3. Use of engine
1) Engine switch
The engine switch is a ignition circuit for starting and stopping engine.
Starting mode 1: The engine starts when the engine switch is placed in the "start" position,
and runs when the engine is placed in the "on" position.The engine stops when placed in
the "off" position.
Starting mode 2: The engine switch is placed in the "on" position and then manually start
the engine, and the engine starts and runs. The engine stops when placed in the "off"
position. (This mode is limited to LC2V80FD).
2) Choke button
The function of the choke button is to open or close the choke valve in the carburetor.
When pull out the button, the choke valve is closed, in such case, it is prone to start the
cold engine. When the engine works normally, it is required to push the choke button in,
that is to say the choke valve is in opening position,
To Next Page
Loading...
