Portable heater Oil filled radiator - Operating instructions
PRODUCT DESCRIPTION HEATER – OIL FILLED RADIATOR:
1 – Handle
2 – Power Switch
3 – Thermostat Control
4 – 24 Hour Timer
5 – Cord Storage
6 – End Cap
7 – Metal Axle Wheels
CAUTION: SURFACE IS HOT IN OPERATION
This Portable heater should not be operated unless it is placed in an UPRIGHT position. REMOVE ALL PACKAGING MATERIAL
FROM HEATER
OPERATION:
1) Select an indoor location for the portable radiator away from electrical cords, curtain drapes and other
furnishings. DO NOT place heater directly beneath an electrical outlet or against paper board or low density
fibreboard.
2)Push MODE switch to OFF and turn the thermostat to LOW before plugging in the oil filled radiator
3) Connect heater electric cord plug into suitable 230V AC electrical outlet then push MODE switch to ON
4) Switch the heater to one of the three power settings
I for 1000W
II for 1500W
I+II for 2500W
To Next Page
Need help?
General
