Long 460 - STOPPING AND INITIAL OPERATION; Engine Shutdown Procedure; New Tractor Preparation

CAUTION!
Prior to engine start, check whether the gear-change
lever is set to its neutral .
Release the brakes.
2. Release the main
clutch pedal gradually and speed engine up by depress-
ing the accele rator pedal.
3. While operating the tractor watch instrument panel gauges .
Stopping the tractor and the engine
1. Slow down engine speed.
2. Disengage th e clutch and step on the brake pedals.
3.
After the tractor has stopped, move gearshift lever to neutral. Release
clutch pedal and
lock the brakes.
4. Let engine run for a few minutes at low
idling speed to cool water and oil
temperature down .
5. Cut
off fuel supply by moving forward injec tion pump control lever and
pulling starting aid button out.
6. Turn contact key to 0-position .
PUTTING A NEW TRACTOR INTO OPERATION
Every new tractor has to undergo a pre-delivery inspection and a running-in
period before being put into operation .
37