LONGONI VITRA - TEMPERATURE ADJUSTMENT

To Next Page

To Previous Page

 7.4 TEMPERATURE ADJUSTAMENT

To set the temperature, proceed as follows :

 Press the central button until appeared the Home Page..

Home page

 Press two times the button right until appeared the temperature icon.

 Press the central button, the set point temperature appeared, adjust the temperature with

the

Button UPPER AND DOWN , press the central button until confirm the value.

7.4.2 DEFROSTING

The refrigerated display case defrost is automatically. In case if necessity manual

defrosts follow these instructions:

 Press the central button the home page appeared.

Press five time the button right until the defrost icon, press the central button until the

defrost start.

The defrost water is conveyed to the condenser drip pan located inside the engine

compartment and evaporates automatically.