Need help?Do you have a question about the Longshine LCS-GS9420-A and is the answer not in the manual?
Provides an overview of the Gigabit Smart Managed Switch features and capabilities.
Lists the main technical specifications and functionalities of the switch.
Covers unpacking, rack-mount installation, and cable connection procedures.
Explains how to access and use the switch's web-based management interface.
Displays system details such as model, uptime, firmware version, and network status.
Details port status, traffic counters, errors, and bandwidth utilization.
Configures the switch's IP address, subnet mask, and default gateway.
Allows configuration of port status, speed, duplex, and flow control.
Enables combining multiple ports into a single high-bandwidth link.
Covers creating, configuring, and managing VLANs and port memberships.
Configures settings for Voice VLANs, including OUI-based detection.
Configures global STP properties like operation mode, priority, and timers.
Sets STP parameters for individual ports, including path cost and priority.
Configures LLDP for device discovery, including global, port, and neighbor settings.
General| SFP Slots | 4 |
|---|---|
| SFP+ | No |
| Jumbo Frame Support | Yes |
| Device Type | Managed Switch |
| MAC Address Table | 8K |
| Power Supply | Internal |
| Power Consumption | 15W |
| Operating Humidity | 10% to 90% non-condensing |
| Uplink Ports | 4 x combo Gigabit SFP |
| Jumbo Frame | 9K |
| Storage Humidity | 5 - 90% RH (non-condensing) |
To Next Page