Longwei Electric LW1510KD User Manual (English)

To Next Page

Warning: Do not connect any load to the power supply before it's turned on.

Likewise, make sure to disconnect the load before shutting down the power

supply. Damages to the power supply can happen if you do not follow this.

Such damages are not under warranty.

Warning: If you are running inductive load like magnetic coils, DC motors,

stepper motors, etc., make sure to change the voltage/current slowly, and

NEVER turn the power supply on or off with a inductive load connected!

I Summary

This serial single output switch power supply is a kind of DC regulated

power supply.

It has high efficiency, stronger load ability, and long continuous working

period characteristics. Also it has perfect over voltage, over temperature,

overload protection functions and so on. It can act as constant voltage as well

as constant current DC power supply. This series of power supplies are first

choices for scientific and research institutions, colleges, factories units ect.

See the models from the table1.

Need help?

Do you have a question about the Longwei Electric LW1510KD and is the answer not in the manual?

Longwei Electric LW1510KD Specifications

General

Model	LW1510KD
Output Current	0-10A
Power	150W
Efficiency	≥85%
Category	Power Supply
Output Voltage	0-15V DC
Protection	Over Voltage, Over Current, Over Temperature
Operating Temperature	0°C to 40°C

Describes the digital ammeter, output terminals, ground terminal, and control indicators.

Specifies input voltage, working temperature, and humidity ranges for optimal operation.

Details voltage stabilization, current stabilization, load stabilization, and noise levels.

Provides step-by-step instructions for power-on, constant voltage, and constant current settings.

Advises on fuse replacement and warns against self-repair due to high voltage circuits.

Lists the user manual and power cord as included accessories.