EasyManua.ls Logo

Lonking CDM308 - Page 67

Default Icon
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER IV MAINTENANCE SECTION
61
TABLE 8
Type Name
Adding oil
quantity(litre)
(reference
value)
Application parts Note
Diesel oil CF15W/40 ≥20 Diesel
Details see to manual of the
diesel engine(CF5W/40 suitable for
winter in the north or exported to
the cold area)
Lubricating
grease
2# universal lithium
lubricating grease
4kg.
Bearing and
articulated parts
Low temperature and pressure
lithium grease suitable for winter in
the north or exported to the cold
area.
4.4.1.3 Oil filling and pressure lubricating grease
1
Diesel engine mechanic oil
1) It is suitable for lubricating system of diesel engine.
2) "Static full" on the oil scale gauge of engine oil shows the oil surface before starting to run the
diesel engine. "dynamic full" shows the surface of engine oil when the engine rotating;"danger" shows to
refill the oil immediately. Replace the oil at the first 100 hours (Expiration of Running-in Period) and then
replace the oil in every 250 hours.
2
Oil for hydraulic system
Fill the oil from the oil orifice on the engine oil tank to the above the middle position of oil leveler in
the oil tank. It mainly produced pressure oil through oil pump for the system. Replace the hydraulic oil
every 1000 hours.
3
Filling lubricating grease
Parts of filling grease are on the every skid bearing or rolling bearing.
1) Bearing of water pump of diesel engine and fan.
2) Bearing of control lever.
3) Pin sheath of all cylinders end.
4) Every pin sheath in the working device.
After working 50 hours, fill lubricating grease for the above-mentioned parts. Please pay attention to
the working conditions and filling way.
4.4.1.4 The maintenance cycle regulated in this manual is determined by the working hours timer
or calendar. The maintaining work should be ranged according to the time cycle. The maintenance cycle
of the loader working under the serious surrounding should be shorten combined with the regular cycle.
4.4.1.5 Combined the inspect and maintenance before using with that after using every day.
4.4.1.6 See to
user manual of diesel engine
for the maintenance of the diesel engine.

Related product manuals