Need help?Do you have a question about the Lonsdor KH100 and is the answer not in the manual?
Steps for new users to register and activate the device via phone or email.
Steps for existing users to log in and activate the device using registered credentials.
Introduces the KH100 as a versatile handheld smart device by Shenzhen Lonsdor Technology Co.
Highlights modern design, built-in instructions, comprehensive functions, super sensor, 8A chip support, and WiFi.
Details device dimensions, screen size/resolution, SD capacity, interfaces, and battery capacity.
Senses simulated chips and detects ignition coils for key identification.
Used for identifying, copying, or generating key chips or remotes.
A 2.8-inch color screen with 320x480 resolution for device interface.
The primary USB-B port for connecting the device to a computer or power source.
A dedicated port designed for connecting remote control accessories.
Controls device power and switching to power-saving mode.
Specific position on the device to place remotes for frequency detection.
Area used for identifying and copying IC cards.
Procedure for identifying and copying various types of chips.
Steps for utilizing the access control key feature.
How to simulate chips by placing the antenna at the ignition switch.
Process for generating chips by placing chip types into the induction slot.
Creating remote controls based on vehicle type and region.
Creating smart keys or cards for various vehicles and regions.
Searching for induction areas and detecting IMMO signals.
Detecting remote control frequency by placing it in the induction area.
Includes infrared signal detection and unlocking Toyota smart keys.
To Next Page
General