How it works
Learn how the Looftlighter X works
Activate Looftlighter X by pressing the On/Off switch for 2 seconds
The device is now activated and ready to use - It will stay activated
for 10 seconds and automatically deactivate if no action is taken
during this time.
The Looftlighter X features two buttons – a Burn button a Boost button. Pressing the
burn-button initiates an automatic ignition program that is developed to maximize lighting
efficiency and minimize power usage.
Burn mode - Heating element On
Automatic Ignition Program
Boost mode - Heating element Off
After 60 seconds the Looftlighter X goes into Boost mode.
The heating element is then automatically shut off and the fan
reaches maximum level.
During the first 15 seconds the fan speed is set at its lowest.
This process builds up heat in the Looftlighter X.
After 15 seconds the fan speed will increase.
After 60 seconds the heating element is shut off and the fan
reaches maximum level (Boost mode)
Visit our website at looftlighter.com to see instruction videos, tips & tricks and more
To end either Burn mode or Boost mode, press the respective button. You can also press the
On/Off switch to deactivate the device.
A.
B.
C.
At any time, you can switch between Burn mode or Boost mode.
To Next Page
Loading...