ASSEMBLY
OPERATION
Light It Up — Set up a pile of fuel you like,
charcoal, woodchips or logs. Touch them
with the tip of the Looft Lighter and press
the button.
Pull Back A Bit — When sparks or a glow
appears, pull back the Looft Lighter a few
inches. Giving it space will help the heat to
spread out and do its magic.
Hit The Spot — Keep your Looft Lighter
aimed towards the same spot for around 60
seconds.
Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
If any parts are damaged or missing, please
contact support@looftindustries.com for
assistance.
TO USE THE LOOFT LIGHTER I:
WARNING WARNING
WARNING
Do not use this product if it is not completely
assembled or if any parts appear to be
missing or damaged. Use of a product that
is not properly and completely assembled
could result in serious personal injury.
Do not attempt to modify this product or
create accessories not recommended for
use with this product. Any such alteration
or modification is misuse and could result in
a hazardous condition leading to possible
serious personal injury.
Do not allow familiarity with products to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict
serious injury.
7
To Next Page
Loading...
