5
EN
Your 765 or 765 DISC set has been designed
and developed following the LOOK design office
specications to provide a comfortable riding
position thanks to its Endurance geometry as well
as a structure made of carbon bre mixed with
natural ax bres to better lter out the vibrations
on long trips.
This result is achieved by using a "sandwich"
structure to allow the Flax Fibres to work between
two layers of carbon bre. This is done to optimise
the performance and the ltering out of vibrations.
Your frame is now delivered with :
• its fork and headset.
• the routing of the derailleur liners for the mounting
of a mechanical groupset.
• the aluminium version of its collar (6 Nm max).
• The LOOK pouch with the optional ttings (end caps).
When tting the rear hanger, tighten the screws to
a torque of 1 Nm. When removing and retting, put
a drop of medium threadlock (LOCTITE 243™ type
on each screw.
The 765 is tted with end caps which allow either
electronic or mechanical groupsets to be used.
Consult your LOOK dealer for the list of compatible
groupsets.
INTRODUCTION TO THE PRODUCT FULL ROUTING OF THE 765
PRE-ASSEMBLY CHECK
Rear derailleur hanger :
Mechanical/electronic routing conguration :
Note : Your 765 frame is routed for a mechanical
assembly (black liner under the bottom bracket).
Note : The 765 is compatible with the Campagnolo
EPS V2 groupset, to t this groupset please refer
to the manufacturer's recommendations.
To Next Page
Loading...
